


Bays 1–3
Three standard car bays, each with all 8 programs available at the panel.
Bay 4 — tall vehicles
Extra vertical clearance and access angle built for vans, utility vehicles, and SUVs with roof boxes.
4 bays in total: 3 for regular cars and 1 dedicated to tall vehicles.



Three standard car bays, each with all 8 programs available at the panel.
Extra vertical clearance and access angle built for vans, utility vehicles, and SUVs with roof boxes.

2 vacuum stations available on-site, for the car interior.
Each station also offers tire air and a tire-shine solution.

The first wash step: loosens hardened dirt from the bodywork with warm foam, prepping the car for the next steps.
A cold-water variant, for continuing to soften dirt across the whole bodywork.
A visible layer of active foam for cleaning large surfaces, before rinsing.
Removes foam and loosened dirt at moderate pressure.
Higher pressure, recommended for tougher dirt or hardened mud.
Especially useful in winter, for a warm-water rinse.
Leaves a protective layer that helps water run off and gives the bodywork a shine.
A final rinse with mineral-free water — no spots or marks as it dries.
Time for the applied solutions (foam, wax) to take full effect, or to check the bodywork — at no charge.
In freezing temperatures, avoid leaving program 3 (active foam) on the bodywork for too long — the water and foam can freeze on the surface, on seals, and on locks. Move quickly to rinsing (programs 4, 5, or 6) and, if possible, use hot water (program 6) for the final rinse.
In summer, the panel replaces the program 1 solution (hot water with foam) with a dedicated insect-removal solution, more effective for the front end and grille in this season. Also, on very hot days, avoid applying program 3 (active foam) directly onto a sun-heated bodywork — the foam can dry too fast and leave streaks or spots that are hard to remove. If the car has been sitting in the sun for a while, let the bodywork cool down a bit before applying foam, or go straight to rinsing.
All the wash solutions used at the Wash and Go Livezeni panels come from a specialized professional manufacturer in Romania. If you'd like to step up your finish — a dry, streak- and scratch-free result — you can always order quality car cloths and towels directly from the manufacturer, at washercar.ro.